: (022)- 2566 1353   : info@omkarindia.com
  • Home
  • Products
  • Vertical Screw Type Plastic Injection Moulding Machine
You Are Here:

Vertical Screw Type Plastic Injection Moulding Machine

Our organization is providing with Vertical Screw Type Plastic Injection Moulding Machine. this injection machine consists of plasticizing unit along with a large shot volume, low cutting and absolute driving. Further, it uses the mold with more cavities by leaving vast space between tie bar and full hydraulic double plate clamping unit.

VST Series VerticalPlastic Injection Moulding Machine Technical Specification

 Description UnitVST 20VST 30VST 40
INJECTION UNIT
Screw Diameter mm 28 30 32
Injection Stroke mm 110 110 140
Stroke Volume cm3 67 77 112
Max. Injected weight (GPPS) gms 60 70 100
Injection Pressure Kg/cm2 1100 1400 1400
Screw L/D Ratio   16 16 16
Screw Speed (Max) RPM 180 200 200
No of Heating Zone   2 1+2 1+2
Heating Capacity Kw 2 3 4
Nozzle Holding Force Tone NA NA NA
CLOSING UNIT
Clamping Force Tone 20 30 40
Mould Opening Stroke mm 150 180 200
Mini. Mould Thickness mm 75 100 130
Maxi. Daylight mm 350 430 480
Tie Rod Dist (W*H) mm 205*155 255*205 280*220
Mould Platens mm 300*250 380*330 410*350
Ejector Force Tone NA NA 1.7
GENERAL DATA
Pump Drive Kw 2.2 (3) 3.7 (5) 5 (7.5)
Total Connected Power Kw 4.2 (5.6) 6.7 (9) 9 (12.8)
Machine Dim (L*W*H) mm 1400*600*1800 1700*800*2200 1900*900*2300
Oil Tank Capacity L 75 100 125
Machine Weight Tone 0.6 0.8 1.1

STANDARD FEATURES

  • Five - points twin toggle system for fast, smooth patens movement and even distribution of the clamp force.
  • Backlit Liquid Display (LCD) and alphanumeric keyboard.
  • Three zone P.I.D. temperature control for barrel. Alarms for set to actual deviation and thermocouple breakage.
  • Cold start protection for screw.
  • Digital position of all times in the range of 0.1 to 999.9 seconds.
  • Internal storage of up to 100 mould set up data.
  • Life counter and production counter can be set separated.
  • Suck back system.

OPTIONAL FEATURES

  • Low pressure mould safety.
  • Electro proportional hydraulics.
  • Core pull - single / Double or hydraulic screwing.
  • Air blast - single / Double.
  • Special screw and barrel set. Linear transducer.
  • Automatic lubrication system.